Your position: Home > Products > Catalogue > HV test Equipment > Withstand Voltage Tester
HM2670 Withstand Voltage Tester

ac high voltage safety measurement instrument

applicable to household appliances withstand voltage test.

I. Summary

MS2670EN type withstand voltage tester is an ac high voltage safety measurement instrument, widely used in electronic instruments, electronic equipment, electronic components, electrical equipment, bakelite appliances, rubber, high voltage cable and motor withstand voltage test, also applicable to household appliances withstand voltage test.

II. Main Technical Parameter

1. Testing voltage:AC:0.5kV5kV  ±5%

2. Leakage current setting value:AC0.220(mA)   adjustable

3. Leakage current setting accuracy:±5%

4. Output power:100VA.

5. Output waveform: 50Hz Sine waveform

6. Timing:199s±5%  manual∞  adjustable.

7.Power source:AC220V±10%  50Hz±2Hz.

8.Environment:RH≤75%RH, Temperature :0℃40℃.

 There is no strong electromagnetic interference source around, no large amount of dust and corrosive gas, good ventilation.

Factory test and shippment

We will do factory test for every product before devilering, to ensure qualified of the product.

We will pack the product carefully and choose suitbale shippment for client,to ensure the safe arrival.

Installation and commissioning

we provide installation and commissioning assistance to get you up and running. Domestically within China or internationally, we will be there to support you. During the installation, integration and operation of a new test system, a variety of special services are involved. If it ’ s necessary, we can offer oversea commissioning service for our clients.

Service and support

In any fault case of our product, we will arrange engineer to deal with your problem within 24hours

Service guarantee

Contact purchase

Product recommendation